Chapter 5 How to Use Keypad
5-7
Mode
Display
Description
Trip mode
TRP
In case of a failure during operation, the failure
type and information on the operating
frequency/current/ voltage at the time of the failure
occurring are displayed. You can also monitor the
type of the trips that previously occurred. Trip
Mode is not displayed when there is no previous
failure history during normal operation.
Config mode
CNF
You can set the use environment for the inverter
itself that is not directly related to operating
functions such as keypad language selection,
monitor mode environment selection, display of
the option card type mounted on the inverter,
parameter initialization and copying.
1) Parameter mode
Mode
Display
Description
Drive group
DRV
Has functions necessary for operation including
frequency/acceleration/deceleration time setting
and operation command selection, etc.
Basic group
BAS
Can set the basic functions such as the motor
parameter and sequential frequency, etc.
Advanced
function
group
ADV
Can set the acceleration/deceleration pattern
and frequency control function, etc.
Control
function
group
CON
Can set functions related to sensorless and
vector control.
Input terminal
function
group
IN
Can set functions related to the inverter input
terminal block including multi-function digital
input and analog input.
Output
terminal
function
group
OUT
Can set the inverter output terminal block
functions such as the relay and analog output.
Communicati
on function
group
COM
Sets the functions related to built-in 485
communication and communication option card
in such a case.
Application
function
group
APP
Sets functions such as PID control and auto
sequence operation.
Auto
Sequence run
group
AUT
This group is displayed if Auto Sequence Group
in APP is selected and sets the functions
necessary for auto sequence operation.
