A2C-SG2-M12
WWW.LILLIESYSTEMS.COM
11 of 44
4
Programming tools
In order to simplify programming and to test sensors from Lillie System, a programming tool and accompanying software may be
purchased to speed up development. If the sensor will be used in standalone mode, these tools are essential. No understanding of
CAN bus and programming is required.
The U2C is the programming tool which connects to the USB port of a windows PC in one end, and the sensor CAN bus on the other
end. The U2C also functions as a general USB to CAN Bus adaptor / bus monitor.
Figure 1 - U2C Programming tool
The window GUI enables the user to easily set most parameters in the amplifier, and in real time see the data.
The A2C firmware must be version 1.0.3.4 or above.