3 - 19
(10) Shuttle lever (Mechanical
synchro-shuttle)
z
This is used to select Forward or Reverse.
z
Forward
: Push the lever forward.
Reverse
: Pull the lever backward.
z
Before reversing the tractor, lower the engine
rpm and check the safety behind the tractor.
▶
The synchro-shuttle shift lever allows any forward range or reverse to be shifted
while the tractor is moving slowly. However, the clutch must be disengaged and the
engaged by means of clutch pedal. Make sure to depress clutch pedal fully and
release it gradually to take up load smoothly, but sudden gear shifting may cause
transmission damage. It is recommended to stop the tractor before operating the
shuttle lever.
Caution
Forward
Reverse
Shuttle lever
(12) Throttle pedal (Mechanical)
z
This pedal is used to control engine speed when
running on the road.
z
When using the Throttle pedal, the throttle lever
must be placed on
Low
speed.
z
An electronic control sensor is attached on this
pedal. If there is an error relating with this sensor
while the engine is running, the engine speed
shall be fixed to 1500 rev/min, so called LIMP
HOME mode. Contact your authorized dealer.
Throttle pedal
(11) Throttle lever
z
This lever is used to control engine speed.
- Pull it backward for
Low
speed,
- Push it forward for
High
speed.
z
The throttle lever must be used only for work
field. When driving on the road, place the throttle
lever to low speed, and use the throttle pedal.
z
For HST model, An electronic control sensor is
attached on this lever. If there is an error relating
with this sensor while the engine is running, the
engine speed shall be fixed to 1500 rev/min, so
called LIMP HOME mode. Contact your
authorized dealer.
Throttle lever
High speed
Low speed
