5 - 9
z
Check the following check points before using to avoid a failure.
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
(1) Engine oil
z
Oil specification and capacity :
See section 5-3, “Lubricants and Capacity” or
the last page in this manual.
z
Using engine oil
Select engine oil depending on the temperature
as shown in the right table.
z
Checking oil level
- Check oil level before starting engine or at 5
minutes later after stopping engine.
- Check If the oil is between MAX and MIN mark
of the oil gauge. If necessary, add new oil.
- It must only be performed while the engine is
stopped.
Temperature
Lubricant No.
Below -10
℃
(Below 14
℉
)
SAE 5W-30
-10
℃
~ 40
℃
(14
℉
~ 104
℉
)
SAE 10W-30
Above 40
℃
(Above 104
℉
)
SAE 15W-40
