HST type
HST type
HST type
HST type
Caution
▶
Check each part before starting
engine.
▶
Check if there is some other
people around before starting.
▶
Place all the levers and switches in
NEUTRAL or OFF position.
1. Sit in the driver’s seat
and apply the parking
brake lever.
2. Place the range gear
shift lever and HST
forward/reverse pedal in
NEUTRAL, and PTO
switch in OFF.
Brake pedal
4WD lever
HST reverse
pedal
Throttle lever
Differential
lock pedal
Parking brake
lever
Range gear
HST forward
pedal
3. Push the throttle
lever to the middle
position of the full
throttle.
4. Turn the key switch
to “ON” and check if
engine oil pressure
indicator, battery
charging indicator, cold
start aid indicator is ON.
5. Wait until cold start
4
4
4
4
- 2
4WD lever
PTO gear
lever (if fitted)
Range gear
shift lever
5. Wait until cold start
aid indicator is OFF.
(about 10~15 seconds)
6. Turn the key switch to
“START” position. As soon
as the engine starts,
release the key switch to
“ON” position.
7. Check if engine oil pressure
indicator, battery charging
indicator is OFF. If any these
indicators is ON, stop the
engine immediately and check.
8. Run engine a few
minutes to allow engine
oil and transmission oil to
warm up.
