3-5. Safety Device
(2) Foldable Safety frame (R.O.P.S type)
(1) Seat belt
Always wear the seat belt before operating the tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a ‘click’ indicates it is properly engaged.
2. To remove the seat belt from the buckle, press the red release button on the buckle.
Check the seat belt regularly. If damaged or frayed, replace it with a new one.
Warning
▶
If not wearing the seat belt, it may cause serious injury in case of accident.
During operation, it must be required to wear seat belt with a cab or safety frame
installed. After wearing the seat belt, adjust the belt to fit the operator.
▶
If safety frame is folded down for frame model, do not wear the seat belt.
How to fold the Safety frame.
1. Loosen the safety frame bolts
② ④
and nuts (both sides)
loosely. (Do not unfasten it completely)
2. Remove the pins
③
on the both side and fold the safety frame
backward.
- Be careful of the possibility that your head, hand and shoulder
might be hurt by sudden folding result from the weight of the
safety frame.
3. Set the holes of the frame
①
and
⑤
in line, and put the pins
③
into the hole to fix the safety frame and apply the snap pin.
4. Fasten the bolts
② ④
and nuts (both sides) tightly.
When standing the safety frame up, follow the same
procedure.
2
4
3
5
1
(2) Foldable Safety frame (R.O.P.S type)
3
3
3
3
- 34
Warning
▶
Do not change or disassemble the safety frame arbitrarily for safety.
▶
Unless the safety frame is applied correctly, it may cause a serious accident on
tractor when being overturned.
- Be sure to stand the safety frame up completely and assemble the bolts, pins and
nuts in correctly.
▶
In case of folding the safety frame.
- Do cooperate with more than 2 people when folding or standing up the safety
frame as it’s heavy.
- Be careful not to be injured by sudden folding, which might occur when folding or
standing up the safety frame, results from its weight.
- Do not wear seatbelt when the safety frame is folded down.
- Do stand the safety frame up again as soon as the work is finished.
