1 - 10
z
Attach or detach the implement on wide and level
ground.
z
Do not use the tractor in combination with
equipment arbitrary, without having consulted the
specific operator’s manual provided with the
equipment.
z
You have to stay clear from the three-point linkage
when controlling it. Do not stay between tractor and
implement.
z
Do not stay between tractor and trailed vehicle for
connecting/disconnecting or checking it. Trailed
vehicle may roll down or tractor can move reverse.
z
When towing the trailed vehicle, use only hitch or
drawbar. Do not tow by connecting with any other
structures.
z
When connecting heavy implements, apply the
parking brake and use the wheel chock.
z
Do not attach over-weighted implement.
▶
Before connecting or checking the implement, put PTO switch to “OFF” and place
PTO gear lever in Neutral position.
▶
When attaching or detaching the implement, make sure to fix the implement and
tighten the three point hitch pins correctly. If not, the serious troubles and injury can
occur during the operation.
▶
If heavy loaded trailer is connected to 3-point linkage or any structure, it can cause
turnover or failure and serious injury. Make sure to use towing hitch or authorized
draw bar.
Warning
(4) Notices when connecting Implement
▶
When connecting or disconnecting hydraulic coupler, lower implement on the
ground, turn off engine and check if the pressure of hydraulic line is released.
▶
When installing the implement having big hydraulic cylinders or lines, check oil
level in tractor transmission housing after installing the implements.
Caution
