LS Industrial Systems SV iC5 Series, User Information

Page: 59 / 143

7. Function list
7-17
SV-iC5
I/O group
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adjustable
during run
Page
I13 [Frequency
corresponding
to I 12]
0/400
[Hz]
Set the inverter output minimum frequency at
minimum current of I input.
0.0 O
I14 [I input max
current]
0/20
[mA]
Set the Maximum Current of I input. 20 O
I15 [Frequency
corresponding
to I 14]
0/400
[Hz]
Set the inverter output maximum frequency at
maximum current of I input.
60.0 O
I16 [Criteria for
Analog Input
Signal loss]
0/2 0 Disabled 0 O 12-7
1 Less than half the value set in I 2/7/12
entered
2 Below the value set in I 2/7/12 entered
I20 [Multi-function
input terminal
P1 define]
0/24 0 Forward run command {FX} 0 O 9-7
1 Reverse run command {RX}
I21 [Multi-function
input terminal
P2 define]
2 Emergency Stop Trip {EST} 1 O
3 Reset when a fault occurs {RST}.
I22 [Multi-function
input terminal
P3 define]
4 Jog operation command {JOG} 2 O 10-3
5 Multi-Step frequency – Low 9-6
I23 [Multi-function
input terminal
P4 define]
6 Multi-Step frequency – Mid 3 O
7 Multi-Step frequency – High
I24 [Multi-function
input terminal
P5 define]
8 Multi Accel/Decel – Low 4 O 9-12
9 Multi Accel/Decel – Mid
10 Multi Accel/Decel – High
11 DC brake during stop 10-2
12 2
nd
motor select 10-
16
13 -
14 -
15 Up-down
operation
Frequency
increase
command (UP)
10-4