48
DRAWBARS
The famous and unique sound of flute drawbar-type organs can be obtained with the Tribute. Lowrey’s
Drawbar
feature allows you to control and customize the volume intensities of each individual flute, bass 16
and bass 8 tabs. The drawbar settings are preset.
4.
There are two ways to manipulate the volume of the drawbars on the screen. To
increase
the
volume of an individual flute tab, press the screen just below the image of the particular drawbar you
wish to change. The flute drawbar image will lengthen, increasing the volume.
Another method to
increase
the volume is to press a drawbar image, highlighting it, and then
repeatedly press the top
Scroll
button, causing the flute drawbar image to lengthen, increasing the
volume.
To
decrease
the volume of an individual flute tab, press the screen just above the flute footage
number on the image of drawbar you wish to change. The drawbar image will shorten, decreasing the
volume.
Another method to
decrease
the volume is to press the drawbar image, highlighting it, and then
repeatedly press the bottom
Scroll
button, causing the flute drawbar image to shorten, decreasing the
volume.
Pressing the
Reset
button or turning off the power will reset the
Drawbars
back to the factory setting. When
you find a drawbar setting you like save it on a
Bank Preset
.
Two ways to quickly set the volume of a specific Flute tab...
As you change the drawbar settings you can hear the results by playing notes on the appropriate keyboard.
SHORTCUT 1:
1.
Press the
Keypad
screen button to display the Numeric Keypad. Press a number, 1 through 10,
on the keypad.
2.
Press the individual
Flute Tab
you want to change. The volume of the flute tab will be changed to the
value entered on the keypad. There is no visual indication of the volume using this method.
SHORTCUT 2:
1.
Press and hold the
Feature (Clear)
button.
2.
Press the
Flute
tab you wish to change.
3.
Release the feature (clear) button. The
Drawbars
display for the section pressed will appear on the
screen.
4.
Change the volume by touching the screen, as described above.
Each drawbar has a volume range of 0 (off - no sound) to
10 (maximum volume).
1.
Press the
Reset
button.
2.
Press the
Custom 2
button, to the right of the
Reset
button.
The touch screen will display the upper drawbar controls.
3.
Press the
Flute 8
tab in the upper tab section, turning it on.
The
Drawbar
display will change to indicate
Flute
8 is set at
5
.