Lowrance M68C IceMachine Installation And Operation Instructions Manual Download Page 77

Page: 77 / 176

At left, M68C IceMachine opening screen, showing the Full Sonar

Chart Page. The Backlight Level control bar automatically disappears

after five seconds. At right, the Full Sonar Chart is shown.

To enter the IceMachine mode:

1. From the Full Chart Sonar page, press

ENT

to switch to

the normal Flasher page.

2. Press

MENU

↓

ACHINE

ODE

ENT

EXIT

and the Ice Flasher ap-

pears. (To leave IceMachine mode and return to normal operation, just
repeat step 2.)

Flasher Page Menu, with IceMachine Mode command highlighted but

turned off (box not checked).

Summary of Contents for M68C IceMachine
















































































































































































Search results

Summary of Contents for M68C IceMachine

Reviews:

Related manuals for M68C IceMachine

Brands by name

Popular brands

Lowrance M68C IceMachine, Installation And Operation Instructions Manual

Search results

Summary of Contents for M68C IceMachine

Reviews:

Related manuals for M68C IceMachine

Brands by name

Popular brands