Lowrance M68C IceMachine Installation And Operation Instructions Manual Download Page 142

Page: 142 / 176

134

Reset Options

To reset all features to their factory defaults:

Press

MENU

↓

YSTEM

ETUP

ENT

↓

ESET

PTIONS

ENT

←

ENT

NOTE:

Reset Options does

not

erase any waypoints, routes, icons, plot trails or

sonar logs.

System Menu with Reset Options command selected.

Screen Contrast and Brightness

To access the Screen menu, press

MENU

ENT

Once in the Screen menu:

To adjust the display's contrast:
The

ONTRAST

slider bar is already selected. Press

→

←

to move the

bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.

Screen Command, left, and Screen Menu with Contrast bar selected, right.

Summary of Contents for M68C IceMachine
















































































































































































Search results

Summary of Contents for M68C IceMachine

Reviews:

Related manuals for M68C IceMachine

Brands by name

Popular brands

Lowrance M68C IceMachine, Installation And Operation Instructions Manual

Search results

Summary of Contents for M68C IceMachine

Reviews:

Related manuals for M68C IceMachine

Brands by name

Popular brands