manualshive.com logo in svg

Lowrance LMS-334c iGPS, Installation And Operation Instructions Manual

The Lowrance LMS-334c iGPS is an advanced navigational tool designed to enhance your boating experience. With its easy-to-use interface, this device provides detailed maps and accurate GPS positioning. To ensure a hassle-free installation and operation, make sure to download the free installation and operation instructions manual from manualshive.com for comprehensive guidance.

Share
Download
background image

172

Edit Trail menu.

Trail Visible/Invisible and Other Trail Options

The name, maximum number of points, active and visible settings are
all changed on the Edit Trail menu screen. The Active setting deter-
mines whether or not the unit is recording new points for a trail.

On the Edit Trail menu, press 

↓

 

↑

, 

←

 

→

 

 to highlight the section you

want to change, then press 

ENT

. Make your changes and press 

EXIT

 to

close the menu. Related trail functions are discussed in further detail
under the Trails topic in Sec. 7, 

Advanced GPS Operations

.

Main Menu with Transparency command selected.

Transparency

Transparency allows you to adjust the transparency of menu windows.
High transparency allows you to continue monitoring the screen's dis-
play while adjusting feature settings, but may cause the menu to be-
come unreadable. Low transparency will usually make menu text eas-
ier to read, at the cost of watching your display.

Summary of Contents for LMS-334c iGPS













































































































































































































Reviews:

No comments

Related manuals for LMS-334c iGPS

RallyTrack SPOT Quick Start Manual preview
SPOT
Brand: RallyTrack Pages: 3
Garmin GPS V Specification preview
GPS V
Brand: Garmin Pages: 2
Garmin GPS II+ Quick Reference Manual preview
GPS II+
Brand: Garmin Pages: 2
Garmin GPS 72H Quick Start Manual preview
GPS 72H
Brand: Garmin Pages: 35
Garmin GPS 72H Safety And Product Information preview
GPS 72H
Brand: Garmin Pages: 40
Garmin GPS GPS 60 Owner'S Manual preview
GPS GPS 60
Brand: Garmin Pages: 90
Garmin GNS 480 Installation Manaul preview
GNS 480
Brand: Garmin Pages: 200
Garmin nuvi serie 500 Manuel D'Utilisation preview
nuvi serie 500
Brand: Garmin Pages: 58
Garmin quatix Owner'S Manual preview
quatix
Brand: Garmin Pages: 22
Garmin GPSMAP 17 Quick Start Manual preview
GPSMAP 17
Brand: Garmin Pages: 16
Garmin GPSMAP 7400 Series Owner'S Manual preview
GPSMAP 7400 Series
Brand: Garmin Pages: 52
Garmin GPSMAP 198C Quick Reference preview
GPSMAP 198C
Brand: Garmin Pages: 2
Garmin GPSMAP 700 Series Руководство Пользователя preview
GPSMAP 700 Series
Brand: Garmin Pages: 66
Garmin GPSMAP 162 Sounder Specifications preview
GPSMAP 162 Sounder
Brand: Garmin Pages: 2
Garmin GPSMAP 176 Owner'S Manual preview
GPSMAP 176
Brand: Garmin Pages: 104
Garmin GPSMAP 176 Owner'S Manual And Reference Manual preview
GPSMAP 176
Brand: Garmin Pages: 86
Garmin iQUE M5 Operating Instructions Manual preview
iQUE M5
Brand: Garmin Pages: 88
Garmin GPSMAP 276C Quick Reference Manual preview
GPSMAP 276C
Brand: Garmin Pages: 2

Brands by name

Popular brands

Load more brands