manualshive.com logo in svg

Lowrance LMS-334c iGPS, Installation And Operation Instructions Manual

The Lowrance LMS-334c iGPS is an advanced navigational tool designed to enhance your boating experience. With its easy-to-use interface, this device provides detailed maps and accurate GPS positioning. To ensure a hassle-free installation and operation, make sure to download the free installation and operation instructions manual from manualshive.com for comprehensive guidance.

Share
Download
background image

156

NOTE

In North Up and Course Up, the present position arrow appears in
the center of the map page. In Track Up, the position arrow appears
centered in the lower third of the page.

NauticPath

 USA Marine Charts

Your unit can display NauticPath electronic charts on MMCs. They
work just like a MapCreate custom map on a MMC.

Nautical Chart Notes

NauticPath charts contain notes or chart information, represented by
circle-i Chart Note icons on the map display. An example is shown in
the following figure.

 

   

NauticPath chart showing Chart Note icon selected by cursor (left).

Note information screen (right).

To view Chart Note information:

1. Use the arrow keys to move the cursor over a Chart Note icon. When
it's selected, a pop-up name box appears.

2. Press 

WPT

 to display the Note Information screen.

3. To scroll through the Chart Note screen, use 

↑

 

↓

 arrow keys to read

the information. To return to the main page display, press 

EXIT

 repeat-

edly.

Summary of Contents for LMS-334c iGPS













































































































































































































Reviews:

No comments

Related manuals for LMS-334c iGPS

Si-tex SVS-460 Operation Manual preview
SVS-460
Brand: Si-tex Pages: 124
Nautic Laugic NL4-Nt Installation And Operation Manual preview
NL4-Nt
Brand: Nautic Laugic Pages: 3
Leica DistoX2 User Manual preview
DistoX2
Brand: Leica Pages: 6
Garmin nuvi 360 Owner'S Manual preview
nuvi 360
Brand: Garmin Pages: 96
Teltonika FMU125 Quick Manual preview
FMU125
Brand: Teltonika Pages: 18
Cobra 7700 PRO Operating Hints Manual preview
7700 PRO
Brand: Cobra Pages: 50
Chinavision CVUK-TR32 User Manual preview
CVUK-TR32
Brand: Chinavision Pages: 14
Garmin GPS 92 Specifications preview
GPS 92
Brand: Garmin Pages: 2
Garmin GPS 31 SL TracPak Technical Information preview
GPS 31 SL TracPak
Brand: Garmin Pages: 28
MikroTik TG-BT5-IN Quick Manual preview
TG-BT5-IN
Brand: MikroTik Pages: 19
Pioneer TS-A1072R - Car Speaker - 20 Watt Operating Instructions preview
TS-A1072R - Car Speaker - 20 Watt
Brand: Pioneer Pages: 5
Pioneer CNDV-1000HD Upgrade Instructions And Operation Manual Addendum preview
CNDV-1000HD
Brand: Pioneer Pages: 8
Pioneer AVIC-W8500NEX/XNUC Manual preview
AVIC-W8500NEX/XNUC
Brand: Pioneer Pages: 8
Pioneer CNDV-700HD Upgrade Instructions And Operation Manual Addendum preview
CNDV-700HD
Brand: Pioneer Pages: 18
Pioneer CNDV-60M Operation Manual preview
CNDV-60M
Brand: Pioneer Pages: 16
Pioneer Premier AVIC-F90BT Installation Manual preview
Premier AVIC-F90BT
Brand: Pioneer Pages: 57
Pioneer AVIC-W6500NEX Operation Manual preview
AVIC-W6500NEX
Brand: Pioneer Pages: 190
Pioneer AVIC-W8400NEX/XNUC Service Manual preview
AVIC-W8400NEX/XNUC
Brand: Pioneer Pages: 240

Brands by name

Popular brands

Load more brands