Lowrance LMS-332C, Installation And Operation Instructions Manual

Page: 138 / 216

130
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
to a "route" when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow on
the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
EXIT
to clear the alarm.
Navigate trail, map views: Left, driver is northbound heading straight
toward trail point 6. At right, northbound driver has reached point 6
and has turned west to follow trail.
Trail
dotted line
Trail point
Present
position
arrow
North
Figure 3. Figure 4.
Figure 1. Figure 2.