Lowrance iFINDER Hunt Page 29 Operation Instructions Manual Download

Page: 29 / 160

Main Menu, Easy Mode.

The Main Menu commands and their functions are:

Go To Cursor

: navigates to the current cursor position on the map.

Cancel Navigation

: turns off the navigation command after you have

reached your destination.

Screen

: changes the contrast or brightness of the display screen and

backlight delay.

Sounds

: enables or disables the sounds for key strokes and alarms and

sets alarm style.

Navigate Trail

: sets up navigation back to the start of the current

trail.

Clear Trail

: clears all points stored in a plot trail.

Sun/Moon Calculations

: finds the rising and setting time of the sun

and the moon.

Units of Measure

: changes the unit of measure for speed and dis-

tance. It also is used to change heading, time and temperature formats.

Set Local Time

: sets the time for your local time zone.

Advanced Mode

: used to switch from Easy Mode to Advanced Mode.

Easy Mode shows only the most commonly used features to simplify
operation.

Transfer My Data

: used to load or save GPS data files to an MMC

card.

Software Info

: shows the product name and software version of the

unit's operating system software, as well as copyright notices.

Pages

Easy Mode has four Page displays that represent the four major oper-
ating modes. They are the Satellite Status Page, Compass Page, Navi-

Summary of Contents for iFINDER Hunt
































































































































































Search results

Summary of Contents for iFINDER Hunt

Reviews:

Related manuals for iFINDER Hunt

Brands by name

Popular brands

Lowrance iFINDER Hunt, Operation Instructions Manual

Search results

Summary of Contents for iFINDER Hunt

Reviews:

Related manuals for iFINDER Hunt

Brands by name

Popular brands