Lowrance iFINDER Hunt Page 98 Operation Instructions Manual Download

Page: 98 / 160

To change map orientation: from the Map Page, press

MENU

↓

RIENTATION

ENT

. Press

↑

↓

to select an orientation option, then press

ENT

. Press

EXIT

repeatedly to return to the main page display.

Map Menu (left); Map Orientation menu with

the Heading Up option selected (right).

Navionics



Charts

Your unit can display Navionics



electronic charts on MMCs. Both the

GOLD



and CLASSIC



format charts are accepted. They work just

like a MapCreate custom map on an MMC.

Entrance to Aransas Pass (left) in a MapCreate 6 custom map, 4-mile
zoom. Remaining images (from left to right): same position on Navion-
ics GOLD



chart at 8-mile, 4-mile and 1-mile zoom ranges.

WARNING:

You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.

To display a Navionics chart:

1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)

Summary of Contents for iFINDER Hunt
































































































































































Search results

Summary of Contents for iFINDER Hunt

Reviews:

Related manuals for iFINDER Hunt

Brands by name

Popular brands

Lowrance iFINDER Hunt, Operation Instructions Manual

Search results

Summary of Contents for iFINDER Hunt

Reviews:

Related manuals for iFINDER Hunt

Brands by name

Popular brands