manualshive.com logo in svg

Lowrance HDS Live, Operator'S Manual

The Lowrance HDS Live, a cutting-edge fishfinder and chartplotter, brings unrivaled performance to your fishing trips. Ensure seamless installation with its comprehensive step-by-step instructions, available in the free Installation Manual. Download it effortlessly from our website and explore the full potential of this must-have device for avid anglers.

Share
Download
background image

Viewing history 

In a SideScan view, pan the image to see sides and history by
dragging the image left, right, and up.
To resume normal SideScan scrolling, select the clear cursor option.

Recording SideScan data

SideScan data can be recorded by selecting the correct file format in
the record dialog. Refer to 

"Start recording sonar data"

 on page 67.

Setting up the image

Use the SideScan menu to set up the image. When the cursor is
active, some options in the menu are replaced with cursor mode
features. Select the clear cursor option to return to the normal
menu.

Source

Ú

Note: 

Available only if multiple sources with the same

capability are available.

Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.

Ú

Note: 

Using transducers at the same frequency can cause

interference.

For source setup information, refer to the HDS Live Installation
Manual.

80

SideScan

 | HDS Live Operator Manual

Summary of Contents for HDS Live







































































































































































































Reviews:

No comments

Related manuals for HDS Live

CES DP-1000S User Manual preview
DP-1000S
Brand: CES Pages: 17
Holux GR-500 User Manual preview
GR-500
Brand: Holux Pages: 14
Cobra 7750 PLATINUM Quick Start Manual preview
7750 PLATINUM
Brand: Cobra Pages: 8
Chinavision RX102 Device Manual preview
RX102
Brand: Chinavision Pages: 17
Garmin GPS 16 Series Technical Specifications preview
GPS 16 Series
Brand: Garmin Pages: 40
Garmin GPSCOM 170 Owner'S Manual preview
GPSCOM 170
Brand: Garmin Pages: 88
CompeGPS TwoNav Delta Quick Manual preview
TwoNav Delta
Brand: CompeGPS Pages: 2
XAiOX SkyStar User Manual preview
SkyStar
Brand: XAiOX Pages: 17
VYPIN VP720 Series User Manual preview
VP720 Series
Brand: VYPIN Pages: 5
APOS GPS-626 User Manual preview
GPS-626
Brand: APOS Pages: 10
Armada Technologies Pro65 Instruction Manual preview
Pro65
Brand: Armada Technologies Pages: 9
VKB-Sim GUNFIGHTER Quick Installation Manual preview
GUNFIGHTER
Brand: VKB-Sim Pages: 2
LXNAV FlarmMouse User Manual preview
FlarmMouse
Brand: LXNAV Pages: 16
LXNAV PowerMouse Manual preview
PowerMouse
Brand: LXNAV Pages: 22
Koden KGP-925 Operation Manual preview
KGP-925
Brand: Koden Pages: 143
J. W. Davis & Company BVR20 User Manual preview
BVR20
Brand: J. W. Davis & Company Pages: 64
Rand McNally intelliroute TND 500 User Manual preview
intelliroute TND 500
Brand: Rand McNally Pages: 111
Rand McNally TripMaker RVND 5510 User Manual preview
TripMaker RVND 5510
Brand: Rand McNally Pages: 156

Brands by name

Popular brands

Load more brands