Lowrance HDS Live, Operator'S Manual

Page: 78 / 198

A
B
• To show the depth from the lowest point of the vessel to the
bottom, set the offset equal to the vertical distance between the
transducer and the lowest part of the vessel,
A
(negative value).
• To show the depth from the water surface to the bottom, set the
offset equal to the vertical distance between the transducer and
the water surface,
B
(positive value)
• For depth below transducer, set the offset to 0.
Use depth and temp data from
Selects from which source the depth and temperature data is
shared on the NMEA 2000 network.
Installation
Used for installation and setup. See the separate Installation manual.
Restore sonar defaults
Restore sonar settings to the factory supplied defaults.
78
Sonar | HDS Live Operator Manual