Lowrance HDS Live Operator'S Manual Download Page 151

Page: 151 / 198

Lists of Sirius channels

Several options are available for displaying the Sirius channels.

Sirius favorite channels

You can create your favorite channels from within the list of all
channels and the list of subscribed channels.

Selecting a Sirius channel

To select a channel:

•

select the left or right audio control button

To page through favorite channels:

•

select the up or down audio control button

Locking channels

You can lock selected Sirius channels from being broadcasted. A
user selected 4-digit code must be entered to lock and unlock
channels.

Viewing DVD video

You can view DVD video from a FUSION-Link device on units with a
Video Adapter cable (000-11010-001, sold separately). The DVD is
shown on a video panel.
You control the video from the audio controller when the audio
source is set to DVD.

Audio

| HDS Live Operator Manual

151

Summary of Contents for HDS Live







































































































































































































Search results

Summary of Contents for HDS Live

Reviews:

Brands by name

Popular brands

Lowrance HDS Live, Operator'S Manual

Search results

Summary of Contents for HDS Live

Reviews:

Brands by name

Popular brands