manualshive.com logo in svg

Lowrance HDS Live, Operator'S Manual

Share
Download
Lowrance HDS Live Operator'S Manual Download Page 164

Select an icon to display detailed weather information.

City forecast

Surface observation

   

Tropical storm tracking; past (grey) - present (red) -
future (yellow)

   

Hurricane (category 1-5) tracking; past (grey) -
present (red) - future (yellow)

   

Tropical disturbance/depression tracking; past (grey)
- present (red) - future (yellow)

   

Storm attributes

Lightning

 

Watch box location and warning

Marine zone location

Marine zone

Depending on your selected subscription, SiriusXM services
includes access to weather reports for U.S. and Canadian marine
zones, with the exception of the high seas zones.
You can select a marine zone and view its forecast. You can also
select a marine zone as your current zone of interest to be notified
of any weather warnings in that zone.

164

SiriusXM weather

| HDS Live Operator Manual

Summary of Contents for HDS Live







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands