Lowrance GlobalMap 6500C, Operation Instructions Manual

Page: 71 / 144

63
Edit Route menu (left). Edit Route Waypoints menu (right),
with Add From Map command selected.
3. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
(If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.)
4. Set the first route waypoint and press
ENT
. In this example, we
started our route at the intersection of 11th Street and 145th E. Ave.
(The route is illustrated in the following figures.)
Route creation sequence (left to right): Fig. 1. Set route waypoint (1) at
11th St. & 145th Ave. Fig. 2. Move cursor north to set point (2) at 145th
& Admiral. Fig. 3. With point (2) set, move cursor east to mark inter-
state on-ramp with waypoint (3). In figures 2 and 3, notice the rubber
band line extending from the previously set waypoint to the cursor.
This line will become the course for the route.
1. 2.
3.