Lowrance GlobalMap 6500C Operation Instructions Manual Download Page 45

Page: 45 / 144

GlobalMap Digital Data page (left) and Two Position Formats page

(right).

Pages Menu with Two Maps option selected (left).

Map Page with two map windows (right). The right map is active.

In pages that have two major windows (such as two maps) you can tog-
gle back and forth between the two windows by pressing

PAGES

This allows you to change which map the cursor, keyboard and menus
operate on. "Active window" will be displayed at the top of the active
window.

Resize Window is another extremely handy feature for pages that have
two major windows. You can change the horizontal size of the windows
to suit your viewing preference. Here's how:

1. From any two-window display, press

MENU

↓

ESIZE

INDOW

ENT

2. Two flashing arrows appear along the centerline dividing the two
windows. Press

←

→

to adjust the window widths. Press

EXIT

to clear

the menu.

3. To change the window size again or revert back to the original dis-
play, just follow the steps above. (Most dual-window displays use half

Summary of Contents for GlobalMap 6500C
















































































































































Search results

Summary of Contents for GlobalMap 6500C

Reviews:

Lowrance GlobalMap 6500C, Operation Instructions Manual, Page: 45 / 144

Search results

Summary of Contents for GlobalMap 6500C

Reviews: