manualshive.com logo in svg

Lowrance GlobalMap 6500C, Operation Instructions Manual, Page: 115 / 144

Share
Download
Lowrance GlobalMap 6500C Operation Instructions Manual Download Page 115

107

Specific Trail Options

Delete Trail

To delete a specific trail: From the Trails Menu, press 

↓

 to 

Trail

Name

|

ENT

. The Edit Trail menu appears as seen in the following fig-

ure. Press 

→

 to 

D

ELETE 

T

RAIL

|

ENT

|

←

 to 

Y

ES

|

ENT

.

Edit Trail menu.

New Trail

To manually start a new trail, in the Trails Menu, make sure 

N

EW 

T

RAIL

is highlighted and press 

ENT

|

EXIT

.

Trail Visible/Invisible and Other Trail Options

The name, maximum number of points in the trail, activity, and visi-
bility are all changed on the Edit Trail menu screen. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail.

On the Edit Trail menu, press 

↓

 

then 

→

 to highlight the Active and/or

Visible checkboxes. Press 

ENT

 to check (turn on) or uncheck (turn off)

the desired feature. Use 

↑

 

↓

 or 

→

 

←

 to make other changes within the

Edit Trails menu. Press 

EXIT

 repeatedly to return to the main screen.

Transparency (available in some models)

Use the transparency menu to adjust the transparency of menu win-
dows. A high transparency allows you to continue monitoring the
screen's display while adjusting feature settings, though the text of the
menus may fade until it is unreadable. A low transparency will usually
make menu text easier to read at the cost of watching your display.

Experiment with this feature until you find the level of transparency
that matches your preferences.

Summary of Contents for GlobalMap 6500C

















































































































































Reviews:

No comments