Code: MSGB202$0500.doc 18/06/2004 P. 5 / 20
Basic principles
To function correctly, the data logging system must be set correctly and this setting must be transferred to
the multimeter (on the RS232 link) or to the network of multimeters connected in the RS485 network. The
data saved in the flash memory of each multimeter can be recalled and saved in an MS-Access format
project file and converted into other formats (ASCII or Excel).
The graphs of each individual measurement can be displayed and printed.
Main window
The main window of the program contains all the menus and the toolbars for access to the various functions.
As they may modify the configuration of the software, some of these functions are protected by a password
and are therefore disabled when the program is started. The main window is illustrated in the figure below
showing the most frequently used controls.
Fig 1.1 – Main window
Window type
menu for data
settings and
display
Toolbar for fast
access to settings
and displays
Selection of the
multimeter in
RS485 network
Start and stop of the
acquisition system of
the multimeter
selected
