Code: MSGB202$0500.doc 18/06/2004 P. 7 / 20
Fig. 2.2 - Configuration-Options-Multimeters
Note 1:
For example if threshold 1 is greater than threshold 2, the datalogger begins recording when threshold 1 is exceeded. When the value of the selected
measure is less than threshold 2, the datalogger is stopped. The two thresholds can be inverted. In that case, the datalogger will trigger when the value of
the selected measure is less than threshold 1 but when it increases to greater than threshold 2, the datalogger will stop.
If the selected measure indicates all three phases, it is sufficient the measure value of one of the three phases is greater than threshold 1 to trigger the
datalogger. The same procedure is done to stop the datalogger.
Adds a new DMK
in the
configuration of
the network
Removes a DMK
from the
configuration of
the network
Selects the
previous/next
DMK
Description of the
DMK. This
identifies the
multimeter and
will be displayed
in the selection
boxes, in the
alarms, in the data
collection etc.
Total number of
DMKs configured
DMK currently
selected
Enables/disables
serial
communication with
the DMK selected
Stop data-logger
when memory full.
Measure associated
to threshold.
Note 1
Note 1
Address multimeter
