APPENDIX #3 – CONNECTION to a LOREX
TIME LAPSE VCR FOR ALARM RECORDING
AND SYNCHRONIZATION
17
Wires being run from the Time Lapse VCR’s or DVR’s alarm terminal must be soldered to the appropriate
contacts of the 25 Pin Alarm Connector.
In addition to connecting up to 16 PIR Motion Sensors, connect the 25 Pin Alarm Connector to a security recorder
such as the Lorex Time Lapse VCR shown below for Alarm Recording upon motion detection. PIN 14 must
connect to the SW OUT of the VCR in order for the two products to automatically synchronize.
For descriptions of each contact on the 25 Pin Connector of the Multiplexer, please refer to Appendix #4.
10
1
14
