100
Using the Auto Email Feature - Appendix #15
Using the Auto Email Feature - Appendix #15
Setting up Email
The SG17LD800 Series & SG19LD800 Series Systems have the ability to automatically send
email when an event is detected. To configure the automatic sending of Emails, the following
Menu option setup is required:
• System Menu - Mail
• System Menu - User Setup
• Event/Sensor - Email Notification
System Menu - Mail
Navigate to the System Menu, and select the Mail Option.
NOTE
: All settings that are completed in the Mail section are for OUTGOING MAIL (i.e. The
same settings that you use to send mail through Outlook or any other mail program. The Settings
needed in this section can be found by contacting your Internet Provider, and asking for your
‘Outgoing Mail Settings’.
•
SERVER
- Enter the SMTP server information provided by your IP
•
PORT
- The default mail port is 25. Only change this if recommended by your Internet Provider
•
SECURITY -
Set the security to ON or OFF based on the recommended settings from your
Internet Provider.
•
USER -
Enter the user name you use for outgoing mail sending for your local account
•
PASS -
Enter the password you use for outgoing mail sending for your local account
