58
Connecting to Your DVR Over the Internet on PC or Mac
Step 1 of 3: Connect your DVR to Your Router
1
Power off your DVR by turning the power switch to
.
2
Connect an Ethernet cable (included) to the
LAN
port on the rear panel of the DVR. Connect
the other end of the Ethernet cable to an empty LAN port (usually numbered 1~4) on your
router.
3
Turn the power switch to
I
to power the DVR back on.
Step 2 of 3: Obtain the DVR’s Device ID
The Device ID is a unique code that allows your system to handshake with the Lorex servers
for connection over the Internet.
To find the Device ID.
1
Press the
PTZ/
button on the front panel of the DVR to open the System Information
window.
2
Write down the
Device ID
of the DVR.
ROUTER
(Not Included)
COMPUTER
(Not Included)
(not required for
local viewing)
INTERNET
Ethernet Cable (included)
8-channel model shown
DVR Device ID
Summary of Contents for LH150
Page 16: ...xiv...