2
Welcome
Welcome to LORENZ
®
Thank you for deciding to use a product from the LORENZ
®
fami-
ly. LORENZ
®
trapeo is a simple, flexible mounting system for tra-
pezoidal roofs.
Please read these instructions for mounting the system. They ex-
plain how to mount parallel systems on pitched, trapezoidal sheet
roofs in accordance with DIN 18807.
Pre-assembled mounting kits ensure rapid installation. The use of
self-tapping screws means there are no shavings and no need to
pre-drill.
Your personal LORENZ Customer Service contact will be
happy to help, should you have any questions that are not
answered by these installation manual.
+49 2234 93309-0
Questions
!
Please read carefully all the safety instructions (from page
10) before installing LORENZ® trapeo for the first time. Also,
please check out any new system components and functions of
our mounting system.
Four pre-drilled holes.
Suitable for use on all
trapezoidal geometries
EPDM seals
40 cm, 74 cm and 94 cm aluminium rails
Cable clip
Clamp from the
LORENZ® solo
system
•
Suitable for use on all trapezoidal sheet
geometries, on roofs with a pitch of up to
60°
•
Can be used with any framed modules
•
Your roof is guaranteed watertight by the
pre-mounting of EPDM material
•
Cables can be fed through the rails or
attached using cable clips if preferred
•
Quality tested materials (10 years war-
ranty)
Self-tapping screws with seal, approved for use in
general construction work
Thread geometry designed
for rapid tightening of
screws
Tip ensures that no
shavings are produced
when screws are tightened
Seal
