G-Link
®
-LXRS
®
Wireless Accelerometer Node
User Manual
System Operational Overview
19
Figure 9 - Sample Settings Menu
3.7
Data Acquisition
NOTE
Once sampling has started it will continue as configured without the need to
leave Node Commander
®
open. However, if the node is powered off and is not
configured to sample on boot- up, data acquisition will end and must be
restarted in Node Commander
®
.
When data acquisition is started, each of the sampling modes has different menu options and
views. Some open a settings menu before data acquisition begins and may include a data list
view and/or a graph view. The following is an example of Synchronized Sampling (
). For more information about synchronized sampling and using
the gateway beacon
see Data Acquisition on page 19
. For more information about other
sampling modes, refer to the Node Commander
®
user manual. (
).
To start a sampling session, nodes can be selected individually or as a group. When selected
as a group, they will all be set to the same sampling mode. Right-click on the nodes and select
Sample > Synchronized Sampling.
