3DM-CX5-GNSS/INS
User Manual
52
Problem
Possible cause and recommended solution
the LORD Sensing MIP Data Communications Protocol (DCP)
to make it readable.
3.6 sensor has been magnetized
Contact or close proximity with magnets may disrupt the sensor
operation and cause magnetization of internal components,
which can affect magnetometer performance. If magnetization
is suspected, use a degaussing tool to demagnetize.
3.7 sensor is damaged
With the sensor in a static neutral position data, look for
baseline offset or drift on the IMU sensor outputs. Sensor
damage can occur as a result of excessive g-force other
conditions outside of its operating specifications.
