PyroTec™ PRO Hardw are User’s Manual, V1.2
87
RT-MN024-1.2 02/21
Depending on your system configuration there may be other parts not described in this
chapter, which have to be exchanged during regular service maintenance procedures.
Please contact your local service organization, for further information on maintenance tasks
and schedule of your system.
9.2.5 Maintenance Table: Two-Yearly Maintenance
While under a service contract, additional activities will occur at the two-year time interval.
Reference material for the maintenance tasks can be available upon request.
Every Two
Years
Instrument/Component
Maintenance Task
Air LiHa Tip Adapter
Replace Tip Adapter Air LiHa.
Air LiHa Cylinder
Assembly
Replace Cylinder Assembly
9.3 Maintenance Tasks
WARNING
Automatically moving parts:
Injuring (crushing, piercing) possible if the safety panels are not in place.
•
Always switch off the instrument for maintenance tasks or to clean the instrument
surfaces, e.g. worktable, instrument panels etc.
•
Never clean the instrument while it is switched on.
9.3.1 Disposable Tip (DiTi) of Air LiHa
ATTENTION
Possible contamination of samples, or leaking of DiTis.
Prior to loading disposable tip trays into the rack and onto worktable, make sure that the
DiTis are faultless and clean.
•
Ensure that only regular and straight Lonza disposable tips are being used.
•
Inspect the DiTi box for traces of microbial contamination.
WARNING
Pipetting tips can cause injuries.
•
Avoid contact with the pipetting tips and contact with aerosols when accessing the
worktable, by wearing adequate protective clothing.
WARNING
Possible contamination. Tips can be contaminated.
•
Assure appropriate safety measures (e.g. wear rubber gloves).
•
Dispose of used DiTis properly and safely according to your local regulations.
