H100LonWorksManual
2
1.
Introduction
1.1
About the LonWorks (Local Operating Network) Platform
The LonWorks is a networking platform created by Echelon Corporation, which is widely utilized in the field of
building automation. On a LonWorks network, all the devices connected to the network nodes can freely
communicate with each other using the LoneTalk protocol. There is no distinction between ‘the master’ and ‘the slave’
devices. Devices connected to the LonWorks network are manufacturer-independent. This independence is achieved
by the use of the standard network variable types (SNVT). The H100 communication module supports these standard
network variable types. Using the standard network variable types, automated data communication becomes
available at the initial installation of the devices. This is done by configuring the input and output variables with an
installation tool. When configuring the input and output variables of the devices, the network variable types used
must always match.
1.2
The H100 LonWorks Communication Module Features
The H100 LonWorks communication module provides control and monitoring for inverters. The LonWorks platform
allows the connection of multiple inverters to a single line, thus saving on the expenses of network implementation.
Also, the LonWorks network features simple wiring, which allows for decreased installation time and easier
maintenance.
1.3
The H100 LonWorks Communication Module - Model Name
Model Name: CLON-H100
1.4
Included Items
The H100 communication module comes with the following items.
- H100 LonWorks communication module x 1EA
- H100 LonWorks user manual x 1EA
- Screws (M3xL08) x 2EA
- 3-Pin connector (PTR AK 950/03-5.0-GREEN) x 1EA
- Module supporter x 1EA
