Operating Instructions
56
Copyright © Loma Systems
Original Document
4.13 Setting Up the User Options
To set up the User Options, proceed as follows:
1. Select Menus > Set Up > User Options to display the available menu options which are listed
and described below.
2. Use the Navigation Keys
to select each option in turn press the OK / Enter Key
to enable the value to be edited.
3. Use the Navigation Keys
to select the required option value and then press the
OK / Enter Key
to confirm the selection.
4. Repeat step 2 and 3 until you have selected and confirmed values for each option.
The User options available for selection are as follows:
Menu Scroll
If this option is enabled then selecting either the Up or Down Navigation Keys will display the
available options in a continuous loop. In effect you only need to keep pressing the one
Navigation Key button to view all available options.
Bar Graph
Options are provided to change the display so that the product signal is shown as a bar graph
rather than a number or a combination of the two displayed at the same time.
Summary of Contents for IQ3X
Page 2: ...Version Number Date Reason 1 29 07 2019 Initial Release ...
Page 28: ...Thispage intentionally left blank ...
Page 33: ...33 Operating Instructions Original Document Copyright Loma Systems 3 9 IQ3X Display Menu Map ...
Page 38: ...Thispage intentionally left blank ...