87
Operating Instructions
Original Document
Copyright © Loma Systems
8. Wait until file has uploaded successfully
9. Disconnect microUSB cable from UCB (yellow)
10. Switch OFF “P” switch on UCB DIP switch (red)
11. Press reset button S1 (blue)
One LED is still ON and one LED diode must blink slowly – appox one per second (green)
12. Switch OFF machine and wait at least 10 seconds (All LED diodes must completely light down)
13. Switch machine ON and wait for configuration menu
14. Switch OFF “C” switch on UCB DIP switch (red)
15. Begin with configuration
If LED is not blinking slowly, repeat upload procedure from beginning
Summary of Contents for IQ3X
Page 2: ...Version Number Date Reason 1 29 07 2019 Initial Release ...
Page 28: ...Thispage intentionally left blank ...
Page 33: ...33 Operating Instructions Original Document Copyright Loma Systems 3 9 IQ3X Display Menu Map ...
Page 38: ...Thispage intentionally left blank ...