Features
USRID-16W User Guide
8
Software Requirements
Software requirements vary depending on the type of file you want the USRID-16W to
generate when plugged into a USB port.
If you wish to configure
USRID-16W products you will need to download the LogTag
®
Analyzer software from LogTag
®
’s web site at
. Follow the instructions to install
and start the software.
Please note that the USRID-16W is fully configured ex-factory, ready to start. Only
a limited number of parameters can be configured, for which you will need this
software.
If you only plan to view a report
, plug the USRID-16W into a computer’s USB port.
Depending on the settings made during configuration, a number of on-board files will be
generated
1
and made available to you in a new drive:
l
a PDF file
you can open the file directly from the logger‘s USB memory storage with Acrobat
Reader 4.0 or later, or any other compatible PDF reader software of your choice
2
l
a CSV file
this file can be imported into a spreadsheet program such as Microsoft Excel
l
an LTD file
LTD files are LogTag
®
Analyzer's native, encrypted data files. You can open this file
in LogTag
®
Analyzer, where you can analyze data in detail, generate report files or
combine data from multiple recorders for comparison
You can also download
data directly into LogTag
®
Analyzer without accessing the logger‘s
on-board files.
1
Depending on the configuration, the USRID-16W may produce all, some or none of the files.
2
PDF files generated by any USB logger can be opened directly in LogTag
®
Analyzer.
www.
.com
1.800.561.8187
