Logosol B1001, User Manual

Page: 41 / 64

41
SUPPORT
1 2
01-00584
(A)
(B)
1
2
1x - 04-00539
04-00537
04-00538
Position of hydraulic hose
Connecting hydraulic cylinders
Connection angle
Warning! Cuts. Never handle pressurized
hydraulic hoses, oil from a pressurized
hose can penetrate the skin and cause
serious injury.
Do not lift or handle hydraulic equipment
connected to the hoses or couplings.
Handle hydraulic hoses and couplings
carefully during assembly and maintenance
work. Avoid sharp bends on hydraulic hoses.
Sharp bends damage the hoses and increase
the risk of breakdown.
Fit the hoses onto the hydraulic cylinder. Note the
location of the respective hose on the cylinder and
valve. The hoses connected to the piston side of the
cylinder shall be connected to the piston side of the
valve. Note the illustration showing the side of
the sawmill into which the hoses should be installed
for each function.
Then perform the procedure on the other functions
based on the respective instruction.
Double-check that all connections are properly
tightened before starting work on the first start-up
of the machine.
the illustration shows the connection angle of
the hoses for each function in top view.
The illustration shows the side of the saw bed to
which the hoses should be installed for each function.
(A)
(B)