Logosol B1001, User Manual

Page: 51 / 64

51
1
2
TRANSPORT
The log loaders must be placed in the transport position
before the sawmill can be transported. Start by putting
the loaders in their top position, secure the lifting arms
(1).
Then lift the log loader foot using the hydraulic lever.
Then secure the foot in the log lift arm (2), note that
the Foot needs to be in its top position in the adjusting
grooves.
Note that the saw head’s blade tensioning
arm must be positioned so that the T-handle is
parallel to the rails so as not to collide with the
log loader in transport position.
Transport position for the log loader
If the machine has a trailer kit and is to be transported,
check that everything on the machine is secure.
The following hydraulic functions must be placed
in transport position before transportation. Before
transportation, make sure that there will not be any
collisions between the functions.
Transporting the machine
The log supports must be placed in the top position
during transport, otherwise there is insufficient ground
clearance and there is a risk of damaging the machine.
Transport position for the log
supports
The log clamp must be placed in its innermost position
before transport in order to maximise ground clearance.
Transport position of log clamp