Operation Manual Network Camera logiware IPC1901A
44
Parameter
Function
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period in Storage>Schedule and select auto record in record control
interface.
Record Delay
System can delay the record for specified time after alarm ended. The value
ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
You need to check the box here so that system can backup motion
detection snapshot file. You shall set snapshot period in Storage>Schedule.
Step 4
Click “Save” to complete the setup of scene changing.
3.3.2 Smart Plan
Smart plan is the master switch for intelligent analysis
“IVS”. The corresponding intelligent
functions can be valid after smart plan is enabled.
Step 1
Select “Setting > Event > Smart Plan”. The system will display the interface of “Smart Plan”,
which is shown in Figure 3-33.
Figure 3-33
Step 2
Click “Save” to complete the configuration of smart plan.
