Logiware IPC1901A, Operation Manual, Page: 21 / 84

Operation Manual Network Camera logiware IPC1901A
18
Parameter Note
Delay
The parameter can be set when the “Day/Night Mode” is “Auto”.
It is to set the switch delay between image color display and white & black
display. The smaller the delay is, the faster of the switch becomes between
color display and black & white display.
Step 3
Click “Save” to complete the configuration of day/night mode.
3.1.1.6 IR Light
You can directly set the mode of IR light if the device is equipped with IR light.
Step 1
Select “Setting > Camera > Conditions > IR Light” and the system will display the interface of “IR
Light” which is shown in Figure 3-6.
Figure 3-6
Step 2
It is to set IR light mode according to the actual scene.
 When the “Mode” is set as “Manual”, it can manually set the brightness of IR light; the system
will realize light compensation to the image according to the IR light intensity.
 When the “Mode” is set as “Smart IR”, the system can adjust the light brightness according to
the actual scene.
 When the “Mode” is set as “Zoomprio”, the system can auto adjust the IR light according to
the brightness change of the actual scene.