Operation Manual Network Camera logiware IPC1901A
40
Figure 3-30
2. Set area name, it is to set valid area of motion detection according to the actual situation, and
it can set the value of sensitivity and threshold respectively.
The bigger the sensitivity is, the easier it is to generate motion detection, the smaller the
threshold is, the easier it is to generate motion detection; the entire video image is the valid
area of motion detection by default.
Note:
Different colors represent different areas; each area can set different detection area.
The red line in the Oscillogram means triggering motion detection; green line means not
triggering motion detection.
3.
Click “Save” to complete area setting.
Step 4
It is to set other parameters of motion detection, please refer to the following sheet for more
details.
