manualshive.com logo in svg

LogIT Black Box, Quick Start Manual

Share
Download
LogIT Black Box Quick Start Manual Download Page 17

15

Method:

 

1. Drop the magnet through the coil.

 

2. Repeat using ‘overlay’ and drop the magnet from a greater height.

 

3. When fi nished, stop the datalogging software.

 

4. Save and print the results.

 

 

Note: Whilst the procedure on paper seems quite straight forward, it can take a bit of practice to get the magnet to pass cleanly    

 

through the coil.  Also, its important that the magnet does not hit hard objects and is caught by a soft cloth as continual impacts will  

 

weaken the magnet or indeed break it completely.

Results:

 

Why does the voltage go fi rst one way then the other?

 

Are the results what you expected?

 

What was done to ensure accuracy of readings?

 

How would you make the experiment a fair test?

 

 

Going further:

 

How might the graph change if more coils were added or a stronger magnet used?

 

What happens if the magnet is reversed and dropped through the coil?

 

Can the speed of the magnet be calculated from the graph?

 

What happens if two magnets are placed together (north to south) and dropped through?

 

 

Physics

Summary of Contents for Black Box













































Reviews:

No comments

Brands by name

Popular brands

Load more brands