SCRUB SINKS USE & INSTALLATION GUIDE
www logiquip com
|
9
Fig 8 – Soap Spout With Nut And Bushing
Fig 9 – Install Soap Spout
Fig 10 – Secure Soap Spout with Bushing
Fig 11 – Install Soap Dispenser Tubing
Fig 12 – Close Up of Soap Pump with Tubing Attached
INSTALLING & OPERATING THE SOAP SPOUT
To prevent damage during shipment, the soap dispenser is stored inside the Sink
Basin Soap Dispenser tubing is also included The dispenser spout should be
installed before hanging the Sink
1 To install - remove the bushing (Fig 8 - Item 3 shown in green)
2 Feed the spout (item 1) through the small hole at the top of the sink (Fig 9) The nut
(item 2) should rest on top of the sink
3 Re-install the bushing onto the spout from inside the cabinet (Fig 10)
4 Attach the soap tubing to the spout and soap pump (circled in red) as shown in Fig 11
and Fig 12
To Operate the Soap Pump - press the soap spout down repeatedly to start the flow of the soap
