SCRUB SINKS USE & INSTALLATION GUIDE
(800) 665-3760
18
|
OPTIONAL IR TIMER ASSEMBLY
An Electronic IR Timer Assembly (S0202-SST-KT, Fig 30) can be purchased and in-
stalled on Infrared Activated surgical scrub sinks
The installation would require some modification of the sink top in order to install
INSTALLING OPTIONAL ELECTRONIC SINK TIMER DISPLAY
1 To mount the timer housing on the sink top, drill three (3) holes using the hole
dimension sizes and locations as shown in the
illustration (below) Two (2) holes are for mounting the timer housing, one (1) for
threading the three (3) flow-switch timer wires to the top side for connection to the timer readout
2 Place a grommet in the 0 38” diameter wire threading hole (Grommet to be supplied by others )
3 Mount the timer housing to the top of the sink in the 0 31” diameter drilled holes (Fig 31) Mounting studs (0 25” diameter) are
provided on the housing Secure to sink top with the provided hex nuts
4 Thread the three (3) flow-switch timer wires through the drilled hole on top of the sink (Fig 32 - circled in red)
5 Connect the three (3) timer wires (black, red and orange) to the timer read-out terminal connections as shown in Fig 33
6 Program the timer as shown on page 19
Fig 30 - IR Timer Assembly For IR Scrub Sinks
Fig 31 - Drill Locations on Sink Top
Fig 32 - Thread Wires Through Grommet Hole
Fig 33 - Wiring Diagram For Timer
Ø0.31
Ø.31
Ø0.38
SSiinnkk BBaacckk SSiiddee
SSiinnkk BBaacckk SSiiddee
Sink Left Side
5
6
7
8
4
3
2
1
RReedd W
Wiirree OOrraannggee
W
Wiirree
BBllaacckk W
Wiirree
Ø0.31
Ø.31
Ø0.38
SSiinnkk BBaacckk SSiiddee
SSiinnkk BBaacckk SSiiddee
Sink Left Side
5
6
7
8
4
3
2
1
RReedd W
Wiirree OOrraannggee
W
Wiirree
BBllaacckk W
Wiirree
Ø0.31
Ø.31
Ø0.38
SSiinnkk BBaacckk SSiiddee
SSiinnkk BBaacckk SSiiddee
Sink Left Side
5
6
7
8
4
3
2
1
RReedd W
Wiirree OOrraannggee
W
Wiirree
BBllaacckk W
Wiirree
Ø0.31
Ø.31
Ø0.38
SSiinnkk BBaacckk SSiiddee
SSiinnkk BBaacckk SSiiddee
Sink Left Side
5
6
7
8
4
3
2
1
RReedd W
Wiirree OOrraannggee
W
Wiirree
BBllaacckk W
Wiirree