GB
6
Pr
epar
ation
4. To remove the base stand, untighten the 4 screws that
hold the base stand to the rear of the TV. Slide the
base stand out.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side
facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam)
beneath the screen.
3. To install the base stand, align the screw hole and
then secure the base stand with provided the 1 screw.
5. Mounting on the wall. This TV is designed to be wall-
mounted with a standard 100 mm x 100 mm mounting
kit designed for flat-panel TVs (sold separately).
Mount this TV according to the instructions included
in the mounting kit. Due to space restrictions, we
recommend that you make all connections (refer to
page 13-16 for details) before mounting on to the wall.
screw
unscrew
Installing / Removing the Base Stand
Screws x 3
(P.N.:
xxxxxxxxxxx
)
Screw A x 1
(P.N.: 209100412B1)
Screw B x 4
(P.N.: 209020410B1)
100 mm
100 mm
Four mounting holes
(size M4x12 screw)
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Customer Technical Services Centre.
Tel: 0844 800 6020 (UK only)
Keep all the spare screws should you want
to use the base stand option.
• Remove the base stand before mounting the TV onto the wall.
• The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with
it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
L24DVDB21_IB_final110411_running change.indd 6
11/04/2011 6:26 PM
