17
GB
Initial S
etup
6. Channel tuning will commence. This operation may take up to 6
minutes. The display will show the progress of the tuning and the
number of channels found.
7. If you want to skip the ATV tuning, press the MENU button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the button to select YES to confirm. You will then go
straight to DTV tuning. You may repeat the above step if you also
want to skip the DTV tuning. An installation reminder will appear
the next time you turn on the TV.
8. After tuning is complete, the channels are arranged in a preset
order. If you wish to skip channels, modify the preset order or
rename channels, select Channel Edit under the Channel menu
(refer to page 21-22 for details).
Channel Tuning
TV : 3 Channel(s)
DTV : 0 Channel(s)
Radio : 0 Channel(s)
Date : 0 Channel(s)
36%... 668.75MHz (TV)
Please press MENU to skip.
5. Press the
buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language
Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country
Select the country where you will operate the TV.
The default country is set as UK.
Dansk
Deutsch
Hrvatski
Italiano
OSD Language
OK
Magyar
Nederlands
Norsk
Polski
English
Cesky
E k
Espanol
~
Fran ais
Portugues
Pycck
France
Greece
UK
Australia
Austria
Czech
Denmark
Finland
Country
OK
Belgium
Bulgaria
Croatia
Hungary
Italy
Luxembourg
Germany
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
3. In standby mode, press the button on the side
panel of the TV or on the remote control to turn
the TV on. The red LED indicator will turn green.
4. The first time you turn the TV on, it will go straight into the First
Time Installation menu. Please ensure the aerial is plugged
in and then press the OK button. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
“Selecting the Input Source” on the next page.)
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
Always disconnect the TV from the mains socket
when not in use for a long period of time.
The button on the side panel of the TV or on the
remote control is only used for switching the TV
into standby, it does not disconnect the TV from the
mains power. To completely disconnect the mains
power, please remove the mains plug from the
mains socket.
To the mains socket
Initial Setup
L24DVDB21_IB_final110411_running change.indd 17
11/04/2011 6:27 PM
