20
Operation
Ringer Volume
The Ringer High-Low switch located at the back of the base unit allows
you to adjust the volume of the ringer.
• High volume
• Low volume
To Make a Call
Method 1
1. Lift the handset or press the button on the base unit. Check for
dial tone.
2. Dial the telephone number. The display shows the duration of the
call in minutes and seconds.
Method 2
1. Dial the telephone number. Lift the handset or press the button
on the Base unit to dial out the number.
2. If you make a mistake you can correct it by using the DEL button to
delete digits and then adding the right ones.
To Receive a Call
When the phone rings; Lift the handset or press the button on the
base unit.
• The display shows the duration of the call in minutes and seconds.
To Adjust the Speakerphone Volume
During a call, adjust the volume of the speakerphone by using the
Speakerphone Volume switch located at the right side of the Base unit.
To End a Call
Replace the handset on the base unit or press the button on the base
unit.
• The speakerphone light indicator will turn OFF.
L04CTAM10_IB_160422_grace.indd 20
22/4/16 11:29 am
