19
Remote Access
The remote access is a three-digit code you need if you call away from
home to check your messages. The default is 321.
To change code:
1. Press the
button. The display shows “OPTIONS MENU ”.
2. Press the button until the display shows “REMOTE ACCESS”.
3. Press the
button to confirm. The first digit of the code will be
flashing.
4. Press the button to set the first digit of the remote access code.
5. Press the
button to confirm. The second digit of the code will be
flashing.
6. Press the button to set the second digit of the remote access
code.
7. Press the
button to confirm. The third digit of the code will be
flashing.
8. Press the button to set the third digit of the remote access
code.
9. Press the
button to confirm the remote access setting.
10. Press the button to return to standby mode.
TAM HD: On/Off Setting
1. Press the button. The display shows “OPTIONS MENU ”.
2. Press the button until the display shows “TAM HD: ON”.
3. Press the
button to confirm. The “ON” will be flashing.
4. Press the button to select ON or OFF.
5. Press the
button to confirm the TAM HD setting.
If it is set to ON it will record up to 8 minutes of messages. If it
is set to OFF it will record up to 20 minutes of messages, but
the quality of the recorded speech will not be as high.
L04CTAM10_IB_160422_grace.indd 19
22/4/16 11:29 am
