10A
-
28
ENGINE AND LOWER ENGINE ASSEMBLY
Engine/gearbox assembly
L90, and K7M, and 710
10A
Remove mounting nut (36) of the gearbox cover on
the gearbox rubber mounting.
Strike the gearbox mounting stud with a copper ham-
mer to uncouple the « engine and gearbox » assem-
bly from the body.
Remove gearbox rubber mounting (37).
Put a shim under the gearbox on the left-hand side
of the sub-frame:
- put a rubber shim under gearbox (38),
- lower the gearbox to fix it in place on the left-hand
side of the sub-frame.
Place tool (Mot. 1390) under the sub-frame.
Lower the vehicle onto the four pads of tool (Mot.
1390).
Adjust the pad position to ensure the sub-frame is
stable on tool (Mot. 1390).
Bring the pads into contact with the underside of the
sub-frame in (39).
Lift the vehicle to separate the « engine and gear-
box/driveshafts/half-axle/sub-frame
» a s s e m b l y
from the body.
107929
109230
36
37
38
17765
108574
WARNING
Ensure that no component obstructs the move-
ment of the body around the « engine and
gearbox » assembly.
39
39
