11A
-
5
TOP AND FRONT OF ENGINE
Accessories belt
L90, and K7M, and 710, and DIRECTION MANUELLE, and AIR CONDITIONING
11A
Mount the belt and slide round the belt fitting tool by
hand clockwise by approximately 90˚.
Position hook (7) as shown in the diagram, with the
longest end of the hook behind the multifunction sup-
port.
Rotate the crankshaft clockwise until the belt is in
place on the crankshaft pulley.
Turn the crankshaft through two revolutions to cor-
rectly position the air conditioning compressor belt.
Torque tighten the wheel bolts (10.5 daNm).
109638
109639
7
109640
Note:
The air conditioning compressor belt fitting tool is
single-use, and must be discarded after use.
109641
WARNING
Connect the battery, starting with the positive ter-
minal; carry out the necessary programming (see
80A, Battery: Remove and Refit).